Property type and floor area
General building form, layout and scale help frame the assessment.
Air Source Heat Pump & Heating Design Services
Heating Systems Designed Around Your Property
TJ VERTEX LTD provides property-focused air source heat pump assessments, heat-loss calculations, low-temperature heating design and installation support across London and surrounding areas.
Project Focus
- Property-Specific Assessment
- Clear Technical Advice
- London-Based Service
- Professional Planning
Technical Introduction
Better Heating Starts with Better Information
A heat pump should not be selected from the property size alone. The building fabric, room-by-room heating requirement, existing emitters, hot water demand and available installation space all need to be considered.
TJ VERTEX LTD takes a measured and property-specific approach to heating assessment and system planning.
The aim is to understand how the property behaves, how the current system is performing and what would be required for a lower-temperature heating solution to work properly.
Heat-loss pathways
Radiator review
Hot water cylinder
Outdoor heat pump
Property Assessment
What We Consider During a Property Assessment
The assessment is structured to build a realistic picture of the property, the current heating setup and the practical constraints that affect design and installation.
A final recommendation can only be made after reviewing the property and the relevant technical
information.
Insulation and glazing
Envelope quality directly affects heat demand and emitter sizing.
Existing boiler or heating system
The current plant and controls inform compatibility and upgrade scope.
Room sizes
Room-by-room dimensions help shape heat-loss and emitter review work.
Existing radiators
Emitter size, condition and location affect lower-temperature operation.
Hot water demand
Occupancy patterns and storage needs help inform cylinder planning.
Outdoor unit location
Available space, clearances and access all need consideration.
Pipework routes
Practical routing can influence installation sequencing and finish quality.
Electrical requirements
Electrical arrangement and supply considerations should be reviewed early.
Customer heating preferences
Comfort expectations and usage patterns matter when planning next steps.
Expertise
Our Areas of Expertise
The website is structured around technical review, heating-system planning and careful delivery support rather than generic marketing claims.
Property Heating Assessment
A structured review of the property, existing heating system, insulation, room sizes and potential installation requirements.
Room-by-Room Heat-Loss Calculation
Detailed calculations used to estimate the heating requirement of individual rooms and the property as a whole.
Low-Temperature Heating Design
Heating-system planning based on the lower operating temperatures commonly associated with heat pump systems.
Radiator and Emitter Review
Assessment of existing radiators and heating emitters to help identify where changes may be required.
Air Source Heat Pump Planning
Support with system location, equipment considerations, pipework planning and property-specific installation requirements.
Hot Water Requirement Review
Assessment of household hot water needs, cylinder space and compatibility with the proposed heating system.
Installation Support
Professional installation support based on the agreed system design, property conditions and scope of work.
Servicing and System Review
Inspection and maintenance support based on system type, manufacturer guidance and customer requirements.
Our Approach
A Clear Route from Enquiry to Proposal
Each stage is designed to move from initial information to a documented, property-specific recommendation.
Initial Discussion
We collect basic information about the property, existing heating system and customer requirements.
Property Review
The building, available space, heating emitters and current system are reviewed.
Technical Assessment
Heat-loss, operating-temperature and hot water requirements are considered.
Proposed Solution
A property-specific proposal and scope of work are prepared using the available assessment information.
Agreed Next Steps
The customer receives clear information about the proposed work, expected process and any further requirements.
Performance Information
Understanding Heat Pump Performance
System performance should be explained in context rather than reduced to a headline claim. Running costs and comfort outcomes depend on the building, the design temperature, the heating controls and how the occupants use the system.
Important note
Actual system performance, running costs and savings depend on the property, system design, energy prices and how the system is used. TJ VERTEX LTD does not guarantee specific energy savings or payback periods.
About
About TJ VERTEX LTD
TJ VERTEX LTD is a London-based company providing professional support for air source heat pump and low-temperature heating projects.
Our approach is based on careful property assessment, clear technical information and honest communication.
Every building has different heating requirements. We therefore aim to understand the property and the customer's needs before recommending the next steps.
We are committed to professional workmanship, transparent advice and appropriately planned heating solutions.
Compliance notice
TJ VERTEX LTD will only display certification, accreditation and consumer-code membership details after the relevant approvals have been formally completed.
Service Area
Serving London and Nearby Areas
- East London
- Central London
- North London
- Greater London
- Nearby areas subject to availability
Service planning is based on property location, assessment requirements and current availability.
FAQs
Questions Before You Get Started
Basic information such as the property postcode, property type, number of bedrooms, current heating system and the service required helps us understand the enquiry.
No. Suitability depends on the building, heat loss, insulation, available space, existing heating system, radiators and hot water requirements. A property assessment is normally required.
Existing radiators should be checked against the room-by-room heat-loss requirement and proposed operating temperature. Some may be suitable while others may require upgrading.
A suitably designed system can provide space heating and domestic hot water, subject to the property requirements and appropriate equipment selection.
The time required depends on the size and complexity of the property and the information needed. The expected process can be explained after the initial enquiry.
Running costs depend on the property, insulation, system efficiency, operating temperature, electricity tariff, controls and customer usage. Specific savings cannot be guaranteed.
Servicing and system-review options can be discussed based on the system type, manufacturer guidance and property location.
TJ VERTEX LTD will only publish MCS certification status after the relevant approval has been formally completed. Please contact us for the current status before entering into any agreement that requires MCS certification.
Complete the enquiry form or call 07741 816977 with your postcode and current heating-system details.
Contact
Tell Us About Your Property
Provide some initial information and TJ VERTEX LTD will contact you to discuss the enquiry and appropriate next steps.
For immediate enquiries, call 07741 816977 or email info@tjvertexltd.com.